* ipmodem.inf Size : 4091 Bytes IP Modem "Driver" 5.2.2005.0 Date 2005/05/26 All NetCom models - Windows .INF-file for IP Modem function - Two models are provided: - "IP Modem" with a maximum serial speed of 460kbps - "Simplified IP Modem" limited to 115kbps, for ports like Com1/2 ---------------------------------------------------------------------- * ModGatePlus-2.1.10-update.zip Size : 18561281 Bytes ModGate Plus Firmware Update to Version: 2.1.10 (Nov 28 2019) supports ModGate Plus 113 / 213 / 413 / 813 v2.1.10 - fix transaction id bug v2.1.8 - license references - change Baudrate field for flexible settings v2.1.7 - bug fix in configuration saving - deny Modbus/RTU with 7bit - earlier update check - add: factory reset per web interface - bug fix for transaction id handling Modbus/TCP v2.1.4 - stabilized IP Address assignment (address persistence) - fixed: rare loss of configuration when reboot v2.1.2 - WLAN also supported - Mode of TCP Gateway (Modbus ID != 255 on Modbus/TCP) - New: Updated Web Interface - New: Partial configuration error checking ---------------------------------------------------------------------- * ModGatePlus-2.1.11-update-all.zip Size : 18638815 Bytes ModGate Plus Firmware Update to Version: 2.1.11 (January 8 2020) supports ModGate Plus 113 / 213 / 413 / 813 v2.1.11 - improved update functionality (add bootloader as updatable) - create new version branch 2.2.x v2.1.10 - fix transaction id bug v2.1.8 - license references - change Baudrate field for flexible settings v2.1.7 - bug fix in configuration saving - deny Modbus/RTU with 7bit - earlier update check - add: factory reset per web interface - bug fix for transaction id handling Modbus/TCP v2.1.4 - stabilized IP Address assignment (address persistence) - fixed: rare loss of configuration when reboot v2.1.2 - WLAN also supported - Mode of TCP Gateway (Modbus ID != 255 on Modbus/TCP) - New: Updated Web Interface - New: Partial configuration error checking ---------------------------------------------------------------------- * ModGatePlus-2.1.11-update.zip Size : 18485299 Bytes ModGate Plus Firmware Update to Version: 2.1.11 (January 8 2020) supports ModGate Plus 113 / 213 / 413 / 813 v2.1.11 - improved update functionality (add bootloader as updatable) - create new version branch 2.2.x v2.1.10 - fix transaction id bug v2.1.8 - license references - change Baudrate field for flexible settings v2.1.7 - bug fix in configuration saving - deny Modbus/RTU with 7bit - earlier update check - add: factory reset per web interface - bug fix for transaction id handling Modbus/TCP v2.1.4 - stabilized IP Address assignment (address persistence) - fixed: rare loss of configuration when reboot v2.1.2 - WLAN also supported - Mode of TCP Gateway (Modbus ID != 255 on Modbus/TCP) - New: Updated Web Interface - New: Partial configuration error checking ---------------------------------------------------------------------- * ModGatePlus-2.1.8-update.zip Size : 18516106 Bytes ModGate Plus Firmware Update to Version: 2.1.8 (July 5 2019) supports ModGate Plus 113 / 213 / 413 / 813 v2.1.8 - license references - change Baudrate field for flexible settings v2.1.7 - bug fix in configuration saving - deny Modbus/RTU with 7bit - earlier update check - add: factory reset per web interface - bug fix for transaction id handling Modbus/TCP v2.1.4 - stabilized IP Address assignment (address persistence) - fixed: rare loss of configuration when reboot v2.1.2 - WLAN also supported - Mode of TCP Gateway (Modbus ID != 255 on Modbus/TCP) - New: Updated Web Interface - New: Partial configuration error checking ---------------------------------------------------------------------- * ModGatePlus-2.2.0-update-all.zip Size : 33094953 Bytes ModGate Plus Firmware Update to Version: 2.2.0 (January 22 2020) supports ModGate Plus 113 / 213 / 413 / 813 v2.2.0 - new kernel base 5.4 - fix wifi default v2.1.11 - improved update functionality (add bootloader as updatable) - create new version branch 2.2.x v2.1.10 - fix transaction id bug v2.1.8 - license references - change Baudrate field for flexible settings v2.1.7 - bug fix in configuration saving - deny Modbus/RTU with 7bit - earlier update check - add: factory reset per web interface - bug fix for transaction id handling Modbus/TCP v2.1.4 - stabilized IP Address assignment (address persistence) - fixed: rare loss of configuration when reboot v2.1.2 - WLAN also supported - Mode of TCP Gateway (Modbus ID != 255 on Modbus/TCP) - New: Updated Web Interface - New: Partial configuration error checking ---------------------------------------------------------------------- * netcan_Plus_Mini_XXX_3.4.8.zip Size : 15312120 Bytes Firmware Version 3.4.8 Date August 27 2019 NetCAN Plus Mini Ethernet Gateways to CAN-Bus Version 3.4.8 - added 211A and 213A types - added multicast support to UDP Mode - added MIB files and documentation for the SNMP configuration - added viaVPN hub functionality - added device type and serial number to the downloaded config file - fix typos in the help texts Version 3.4.7 - fixed mode switching bug Version 3.4.6 - updated CAN controller firmware - added optional J1939 support Version 3.4.4 - Initial Release, same functions as NetCAN Plus ---------------------------------------------------------------------- * netcan_Plus_XXX_3.4.8.zip Size : 19881512 Bytes Firmware Version 3.4.8 Date August 12 2019 NetCAN Plus Ethernet Gateways to CAN-Bus Version 3.4.8 - added 211A and 213A types - added multicast support to UDP Mode - added MIB files and documentation for the SNMP configuration - added viaVPN hub functionality - added device type and serial number to the downloaded config file - fix typos in the help texts Version 3.4.7 - fixed mode switching bug (Mini) Version 3.4.6 - added Huawei ME909 mobile modem - fixed WEP default key value - speed-up for WLAN initialisation in AP mode - updated CAN controller firmware - added optional J1939 support Version 3.4.4 - added UDP support - added WLAN stick support for Plus Mini Series - changed CAN speed setting in bridge mode from listbox to value - increased possible raw clients to 256 Version 3.4.3 - added active firmware update function over web-frontend Version 3.4.1 - added UPNP notify support - added WPA-Enterprise support - added subsequent upload of viaVPN certification files - added debug and trace file on USB stick support - fixed memory bug in webserver Version 3.3.5 - changed default UDP push timeout value - added new firmware update layer - delete CAN filters on factory setting - WLAN now allows non-encrypted connections - added viaVPN support - added sntp interval function - fixed negative UTC time bug ---------------------------------------------------------------------- * netcan_Plus_XXX_3.4.9.zip Size : 23377534 Bytes Firmware Version 3.4.9 Date May 18 2020 NetCAN Plus Ethernet Gateways to CAN-Bus Version 3.4.9 - move to kernel 5.4.x - add support for SIMCom SIM7600G-H modem - RDY LED blinks during the firmware update Version 3.4.8 - added 211A and 213A types - added multicast support to UDP Mode - added MIB files and documentation for the SNMP configuration - added viaVPN hub functionality - added device type and serial number to the downloaded config file - fix typos in the help texts Version 3.4.7 - fixed mode switching bug (Mini) Version 3.4.6 - added Huawei ME909 mobile modem - fixed WEP default key value - speed-up for WLAN initialisation in AP mode - updated CAN controller firmware - added optional J1939 support Version 3.4.4 - added UDP support - added WLAN stick support for Plus Mini Series - changed CAN speed setting in bridge mode from listbox to value - increased possible raw clients to 256 Version 3.4.3 - added active firmware update function over web-frontend Version 3.4.1 - added UPNP notify support - added WPA-Enterprise support - added subsequent upload of viaVPN certification files - added debug and trace file on USB stick support - fixed memory bug in webserver Version 3.3.5 - changed default UDP push timeout value - added new firmware update layer - delete CAN filters on factory setting - WLAN now allows non-encrypted connections - added viaVPN support - added sntp interval function - fixed negative UTC time bug ---------------------------------------------------------------------- * netcom_Plus_Mini_XXX_3.4.7.zip Size : 15401109 Bytes Firmware Version 3.4.7 Date October 11 2018 NetCom Plus Mini Serial Device Servers Version 3.4.7 - fixed mode switching bug Version 3.4.6 - fixed UDP mode setting Version 3.4.4 - added WLAN stick support for Plus Mini Series - fixed modem status register problem when set manually by user - increased possible raw clients to 256 Version 3.4.3 - added active firmware update function over web-frontend - added RxTimeout function for the UDP mode - fixed UDP packet size and timeout function Version 3.4.2 - small fix for UDP buffer size handling Version 3.4.1 - initial release for NetCom Plus Mini - added UPNP notify support - added WPA-Enterprise support - added the intercharacter serial read timeout function - added subsequent upload of viaVPN certification files - added debug and trace file on USB stick support ---------------------------------------------------------------------- * netcom_Plus_XXX_3.4.8.zip Size : 19984469 Bytes Firmware Version 3.4.8 Date August 27 2019 NetCom Plus Serial Device Servers Version 3.4.8 - added 211A and 213A types - added multicast support to UDP Mode - added MIB files and documentation for the SNMP configuration - added viaVPN hub functionality - added device type and serial number to the downloaded config file - fix typos in the help texts Version 3.4.7 - fixed mode switching bug (Mini) Version 3.4.6 - added Huawei ME909 mobile modem - added Huawei MU709 mobile modem - fixed WEP default key value - speed-up for WLAN initialisation in AP mode - fixed UDP mode setting Version 3.4.4 - added WLAN stick support for Plus Mini Series - fixed modem status register problem when set manually by user - increased possible raw clients to 256 Version 3.4.3 - added active firmware update function over web-frontend - added RxTimeout function for the UDP mode - fixed UDP packet size and timeout function Version 3.4.2 - small fix for UDP buffer size handling Version 3.4.1 - initial release for NetCom Plus Mini - added UPNP notify support - added WPA-Enterprise support - added the intercharacter serial read timeout function - added subsequent upload of viaVPN certification files - added debug and trace file on USB stick support ---------------------------------------------------------------------- * netcom_Plus_XXX_3.4.9.zip Size : 23480874 Bytes Firmware Version 3.4.9 Date May 18 2020 NetCom Plus Serial Device Servers Version 3.4.9 - move to kernel 5.4.x - enable setting 12Mbit/s baudrate in the web and Telnet interfaces - fix opening Driver Mode ports in the reversed order - fix Driver Mode KeepAlives - add support for SIMCom SIM7600G-H modem - RDY LED blinks during the firmware update Version 3.4.8 - added 211A and 213A types - added multicast support to UDP Mode - added MIB files and documentation for the SNMP configuration - added viaVPN hub functionality - added device type and serial number to the downloaded config file - fix typos in the help texts Version 3.4.7 - fixed mode switching bug (Mini) Version 3.4.6 - added Huawei ME909 mobile modem - added Huawei MU709 mobile modem - fixed WEP default key value - speed-up for WLAN initialisation in AP mode - fixed UDP mode setting Version 3.4.4 - added WLAN stick support for Plus Mini Series - fixed modem status register problem when set manually by user - increased possible raw clients to 256 Version 3.4.3 - added active firmware update function over web-frontend - added RxTimeout function for the UDP mode - fixed UDP packet size and timeout function Version 3.4.2 - small fix for UDP buffer size handling Version 3.4.1 - initial release for NetCom Plus Mini - added UPNP notify support - added WPA-Enterprise support - added the intercharacter serial read timeout function - added subsequent upload of viaVPN certification files - added debug and trace file on USB stick support ---------------------------------------------------------------------- * usbip-firmware.zip Size : 6148532 Bytes NetUSB-400i Firmware 26/January/10 - Version 1.0.0.47 ---------------------------------------------------------------------- * VSCAN_API_1_8_0.zip Size : 345196 Bytes API v1.8.0 for VSCAN products - April 26 2016 - Supports USB-CAN, USB-CAN P, SER-CAN, NET-CAN 110, PCI-2CAN - Supports Windows 32, Windows 64, WinCE, Linux (x86, x86-64, ARM) - Simulates PEAK-System Technik GmbH CAN-Light API - 1.6.0: self reception support - Supports C/C++, C#, VB.NET, Delphi - 1.7.0: fix for detection on WinCE - 1.8.0: new filtering support (for NET-CAN Plus) ---------------------------------------------------------------------- * vs_can_firmware.zip Size : 38289 Bytes Firmware Version 2.1 Date August 08 2019 USB-CAN Plus Adapters USB to CAN-Bus (includes Update tool) Version 2.1 - bugfixes ---------------------------------------------------------------------- * WindowsCE5x86_ARM.zip Size : 1485273 Bytes PCI-CAN Drivers February 22, 2011 - Windows CE 5.0 - x86 systems - ARM processors ----------------------------------------------------------------------